光纤熔接热缩保护管套的使用
光纤热缩保护管用于保护和支撑光纤的熔点。一飞通讯生产提供单根到 12 根光纤的光纤热缩保护管。
Fiber Protection sleeve is used for protecting and supporting the fusion splice point. Single fiber to maximum 12 fibers protection sleeves are available from E-photics.
⚫ 符合 RoHS Meeting RoHs
⚫ 特殊设计由交联聚烯烃,热熔管和增强型不锈钢组成的
Consist of cross-linked polyolefin, hot fusion tubing and stainless reinforced steel rod(quartz or Ceramic)
⚫ 光纤接续保护元件,不影响光纤的光导特性
Keep optical transmission performance of optical fiber
⚫ 保护接续点,提高机械强度
Provide safe protection to optical fiber splicing
⚫ 操作简单,降低安装时损伤光纤的危险
Easily use and avoid any damage to the optical fiber during installation
⚫ 透明套管,使得对光纤接续状况一目了然
Clear sleeve makes it easy to detect splicing before shrinkage
⚫ 密封结构使接续具备良好的耐温度、湿度性能
Sealing structure provides good performance to the Splicing in the environment with temperature and humidity
技术参数:
性能 Properties | 测试方法 Test Method | 典型数据 Typical Data |
抗张强度 Tensile Strength(MPa) | ASTM D 2671 | 18 |
断裂伸长率 Ultimate Elongation (%) | ASTM D 2671 | 700 |
密度 Density(g/cm2) | ISO R1183D | 0.94 |
介电强度 Dielectric Strength (KV/mm) | IEC 243 | 20 |
介电常数 Dielectric Constant | IEC 243 | 2.5 |
长度变化率 Longitudinal Change (%) | ASTM D 2671 | 5 |
产品结构图:
Note:
1. 各种颜色尺寸均可订制
Other colors are available on request.
2. W:白色 B:蓝色 O:橙色 G:绿色 N:棕色 S: 深灰色
R:红色 K:黑色 Y:黄色 V:紫色 P:粉红色 A: 碧绿色
W for white, B for Blue, O for orange, G for green, N for Brown, S for Slate, R for red, K for Black, Y for yellow, V for violet, P for pink, A for Aqua.
需要光纤熔接热缩保护管套价格可与我们联系,一飞通讯为您提供光通讯光纤跳线连接器、熔接热缩保护套管、磁光开关、机械式开关等一系列产品服务。
新闻资讯
产品中心
联系我们
新闻资讯
关于我们
关注我们
一飞通讯官方微信